Product Description
Technical Data
- Min. pressure - 0 psi
- Return force to min. height - <45LBF/200N
- Overall Weight - 2.4KG
- Min. Design Height - 50MM
- Inst.Space Required - 140MM
- Max. Stroke - 90MM
AIRSUSTECH:1B8X4
OEM Original Equipment Manufacturer:FS 120-10 CI
AIR INLET 1/4 NPT:
Firestone : W01-358-7564
Goodyear:1B8-550
Contitech:FS120-10
Description
Assembly Order No.
Style 116 Two Ply Bellows
Blind nuts, 1/4 NPT:W01-358-7564;W01 358 7564;W013587564
Blind nuts, 3/4 NPT:W01-358-7561;W01 358 7561;W013587561
Countersunk steel bead rings,19/4 bolts, nuts, washers:W01-358-7568;W01 358 7568;W013587568
Blind nuts with installed 1/4 tank valve W01-A72-7518;W01 A72 7518;W01A727518
Rubber bellows only:W01-358-0133;W01 358 0133;W013580133
Style 117 High Bellows
Blind nuts, 1/4 NPT:W01-358-7600;W01 358 7600;W013587600
Blind nuts, 3/4 NPT:W01-358-7602;W01 358 7602;W013587602
Countersunk steel bead rings,Strength 13/4 bolts, nuts, washers:W01-358-7606;W01 358 7606;W013587606
Technical performance parameter list of AIRSUSTECH 1B8X4 air spring:
Bearing
load
Power
(kg) | Inflation pressure | 0.2MPa | 0.3MPa | 0.4MPa | 0.5MPa | 0.6MPa | 0.7MPa | 0.8MPa | 0.7MPa
Volume(dm³) |
| Installation height | | | | | | | |
| 55(mm) | 433 | 664 | 897 | 1131 | 1354 | 1585 | 1822 | 1.11 |
| 78(mm) | 396 | 598 | 803 | 1015 | 1236 | 1441 | 1647 | 1.34 |
| 101(mm) | 314 | 471 | 646 | 820 | 996 | 1175 | 1321 | 1.47 |
| 124(mm) | 208 | 318 | 434 | 555 | 675 | 798 | 920 | 1.79 |
| 130(mm) | 167 | 258 | 348 | 438 | 535 | 636 | 733 | 1.86 |
| 147(mm) | 56 | 96 | 133 | 179 | 226 | 274 | 331 | 2.04 |
| 149(mm) | 19 | 41 | 64 | 93 | 126 | 164 | 208 | 2.08 |
| 155(mm) | 2 | 10 | 20 | 41 | 51 | 80 | 100 | 2.15 |
| Stiffness and frequency at design height | Vertical stiffness(Kg/cm) | 132 | 170 | 182 | 203 | 230 | 268 | 285 | |
| Stiffness and frequency at design height | Natural frequency Hz | 4.45 | 4.06 | 3.62 | 3.4 | 3.28 | 3.25 | 3.12 | |
| Stiffness and frequency at design height | Natural frequency cpm | 267 | 244 | 217 | 204 | 197 | 195 | 187 | |
PURCHASE ORDER DATA
| Type | Air Inlet | Order No. | |
| | | |
| with crimped plates | 1/4 NPT 0 in. excentrical | |
AIRSUSTECH1B8X4 air spring is used in DIE STRIPPER:
In each cycle of injection molding, the plastic part must be ejected from the mold cavity or the insert. The mechanism of this ejection of the plastic part in the mold is called the ejection mechanism (or the ejection mechanism, the ejector mechanism). The function of the demoulding mechanism includes two actions: ejection and removal, that is, firstly, the plastic parts and the pouring system condensate are loosened and separated from the mold, which is called ejection, and then the protruding material is taken out from the mold.
2.7.1 Classification of demolding mechanism:
1, according to the driving mode
(1) Manual demoulding (2) Motorized demolding (3) Hydraulic demolding (4) Pneumatic demolding
2, according to the action of the release mechanism
(1) Primary ejection mechanism (2) Secondary ejection mechanism (3) Delayed action ejection mechanism
3, according to the ejection parts in the mold
(1) Push rod type demoulding (2) Push tube type demoulding (3) Push plate type demoulding
4. Hybrid classification
With the variety, size and shape of plastic parts, there are many types of demolding mechanisms. It is inconvenient to divide by the same standard. In production practice, the mixed method is more practical and intuitive.
